#
# this config file was automatically generated
# using lirc-0.6.0pre5 on Sun Mar 12 00:39:42 2000
#
# contributed by Andreas Leitner <andreas.leitner@chello.at>
#
# brand:             PANASONIC
# model:             VEQ1944 
# supported devices: 
# note: This is the remote that came with my PANASONIC NV-HD620 VCR.
#	Buttons which affect the mode (i.e. the display) of the remote
#	are not listed. Also due to technical reasons this file will only
#	work if you are using Irman as a receiver.
#

begin remote

  name  VEQ1944
  bits           28
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   36
  pre_data       0xFFFF40040
  gap          229896
  repeat_bit      0

      begin codes
          1                        0x0000000001000809
          2                        0x0000000001008889
          3                        0x0000000001004849
          4                        0x000000000100C8C9
          5                        0x0000000001002829
          6                        0x000000000100A8A9
          7                        0x0000000001006869
          8                        0x000000000100E8E9
          9                        0x0000000001001819
          0                        0x0000000001009899
          TV_POWER                 0x000000000100BCBD
          VCR_POWER                0x000000000900BCB5
          PLAY                     0x0000000009005059
          STOP                     0x0000000009000009
          BACK                     0x0000000009004049
          FORTH                    0x000000000900C0C9
          PAUSE                    0x0000000009006069
          VOLUME_PLUS              0x0000000001000405
          VOLUME_MINUS             0x0000000001008485
          TRACK_PLUS               0x0000000001002C2D
          TRACK_MINUS              0x000000000100ACAD
          INPUT_SELECT             0x000000000900030A
          OSD                      0x000000000900EAE3
          AV                       0x000000000100A0A1
          INDEX_BACK               0x000000000900929B
          INDEX_FORTH              0x000000000900525B
      end codes

end remote


